Foam Cutters

There is a wide variety of foam cutters available at FCM. The main foam cutting equipments includes YU-07 Horizontal Cutter (Slitter), YU-08 Vertical Saw, YU-11 Convoluter, and CNC Contour Cutter. All of the foam-cutting equipment has different specifications and are available at reasonable prices. The equipment well suits the fabrication industry in order to increase profits in today's competitive world. If unable to pay the whole amount, the customers at FCM are also offered the approved credit policy.

The YU-07 Horizontal foam cutter is fully automatic equipment. It consists of a vacuum table and has overall dimensions of 211" x 155" x 140". The cuttable width and height of the machine is 88" and 51" respectively. This horizontal slitter has a maximum speed of 164 feet/minute. The dimensions of the motor are 5HP x 1, 3HP x 3, 1/8HP x 2, ¼ HP x1. The Slitter is available for as low as $800.00/month on approved credit.

The YU-08 Vertical Saw is a vertical foam cutter with unique specifications. The overall dimensions of this machine are 157" x 181" x 96". The cuttable width, height, and thickness of the Vertical Saw are 88", 50", and 0.11" (and up) respectively. At FCM, the equipment is offered at as low as $185.00 per month on approved credit conditions.

The YU-11 Convoluter foam cutter consist of 3HP knife motor and 2HP main motor which consist of the deceleration and frequency conversion features. The cutter also includes a 1/16HP blade grinding motor. The cuttable width and thickness of this foam cutter is 64.5" or 84" and .78"-2.36" respectively. One of the main aspects of the Convoluter is its adjustable pattern feature. At FCM, the Convoluter cutter is available at lowest price of $850.00 per month under the approved credit policy.

The CNC Contour Foam Cutter is one of the most renowned products offered by FCM. This foam-cutting machine is used for flexible polyurethane foams and is based on the concept of a German model. Within the past fifteen years, the CNCfoam cutters have become the premium choice of many foam fabricators, including FCM. This is a Computer Numerically Controlled (CNC) foam cutting equipment that consist of off-the-shelf software and has an open architecture system. This system is wholly based on the U.S. file standard dxf and G codes. The standard cutting capacity of the machine is 90-inch width, 51-inch height, 98, or 120-inch length with a maximum cutting speed of 39 feet per minute. In order to collect all the relative information about the above mentionedfoam cutters, just log onto www.foamcuttingmachinery.com. Moreover, for the convenience of the customers, the FCM site map and contact address information is also present on the website.